Categories
Violin

Why does my violin squeak? Where to start

There is nothing worse than hearing a squeaking sound of a violin, or, as some people say, a screaming cat. And sometimes it happens when you try to play to an audienceā€¦ That is one of the most feared aspects of violin playing. Parents fear to hear squeaking sound from their kid’s violin; starter violinists fear to scratch for a long time before being able to play a good sound on their instrument.

So, why do violins squeaks so quickly when people start to learn how to play? First, the violin has to be clean, and the strings have to be in good condition. Then squeaking sound is entirely due to lack of right-hand technique for sound production. The right arm has to master: 1. The correct pressure to apply to the string given the speed of the bow 2. The placement of the bow between the bridge and the fingerboard 3. The bowing technique should be in a straight line. The pressure should be relieved when changing bow directions.

Contrary to a piano where it is enough to hit a key to produce a sound (though there is more to it, of course), a violinist has to master tone production from the start and entirely. This is easier said than done. That is why the sound is never great for a beginner.

Let’s see the key factors that will inevitably make the violin squeak; some you won’t consider.

1. What to check in the violin to prevent squeaking sounds

The violin has to be in good condition and well-tuned by the maker. But it is the duty of each violinist to check for the following points:

  1. The strings have to be clean of all rosin. At the end of each rehearsal or concert, the strings have to be cleaned with a clean cloth and alcohol in order to take off any remaining rosin. The rosin will otherwise build up and prevent the string from vibrating properly.
  2. The strings have to be in good condition. They shouldn’t be too old. If you start to have a proper technique, but you are not happy with the sound, change your strings because they wear out more quickly than we anticipate.
  3. The good amount of rosin has to be put on the bow. Not too much, not too little. If too much, the bow is too white, and rosin dust spreads immediately while playing, making a kind of cloud. Wipe it off with a cloth. If too little rosin, the hair of the bow doesn’t have enough resistance to grip the string and vibrate it, which leads to airy sounds, sometimes whistling sounds, a bit like unwanted flageolets. Add rosin by scrubbing gently on the rosin, a couple of times at the tip and at the frog, and evenly on the length.
  4. Rosin: Experiment with different kinds of rosin. You might eventually find the one with a better sound. But frankly, this is not the main cause of a squeaking sound.
  5. The bow has to be re-haired. Though less likely, again, the hair of a bow wears out as well, and after one year of playing it is often time to have it replaced.

2. How to avoid scratchy or squeaking sounds: the point of contact

The sound of the violin is made by the hair of the bow gripping the string to vibrate it.

  1. First common misconception (or bad habit) of beginners is to apply too much pressure on the string. That’s not their fault. They don’t have enough technique to use the proper bow speed to go with the pressure they apply. Plus, they want to make a sound by pressing the string with the help of the strength of their arm. That prevents the string from vibrating. The string has to make rounds in space in order to vibrate. The pressure prevents the string from moving freely in space, that is to say, from vibrating. And as you can’t get a bad vibration, you get none at all.
  2. Secondly, a squeaking sound is produced by a bad contact point of the bow on the string. When the string is played fast, the point of contact has to be closer to the scroll. When played slow, it has to be closer to the bridge. When the pressure is weak, closer to the scroll, but when there is a lot of pressure, closer to the bridge. And lastly, when the left-hand plays in high positions, the string becomes shorter. The consequence is that the point of contact has to go closer to the bridge, again, to allow the string to vibrate freely.
  3. Lastly, when the hair of the bow vibrates the string, there is a vertical pressure. When the bow changes direction, that pressure has to be relieved slightly, otherwise, you will make a new sound with the pressure already applied (as opposed to progressively applied). This will squeak or even make a whistling sound if the string is not gripped properly.

These tables will give you the right point of contact of the bow to the string, depending on pressure and/or bow speed.

ScrollBridge
Bow pressure +X
Bow pressure –X
ScrollBridge
High bow speedX
Low bow speedX

This bow placement has to become second nature through many hours of learning and trial and errors. But knowing the theory will make you win big time. And not all violin teachers know that in detailā€¦

Applying too much pressure will prevent the string from vibrating. Playing too close to the scroll will prevent the string from vibrating. Playing too close to the bridge will give a scratchy sound.

A beginner will of course, have to learn how a violin produces a sound in order to understand the bow technique. But in a nutshell, if you don’t want to be a classical virtuoso and want to have a quick answer, when in doubt always:

  • Use more bow speed than intended (you will risk airy a light sound but will prevent squeaking), use two bows if the note is long;
  • play closer to the bridge than you are used to (the string will vibrate, you will risk scratching sound, which less irritating than squeaking string);

3. Bowing technique

What we’ve just said is somehow related to bowing technique, but was more specifically the point of contact between the bow and the string.

Now we consider the motion of the bow itself. Again, tone production is key when we speak of playing the violin, and squeaking is the very first level. Bow technique is key.

  1. Play the bow in direct strokes, straight, parallel to the bridge. Playing in circular motions tend to generate a bad sound. It is important to play while watching oneself in a mirror in order to practice straight bowing. The difficulty is to get a fast straight bow motion. Playing in front of a mirror is essential. When your teacher is not here to correct your gesture, some people have good results using a straight bow guide, which can be found quite cheap on Amazon.
  2. A beginner usually has problems using the shoulder (to go to the frog of the bow) and easily uses the elbow. Then, to avoid squeaking, it is preferable to start playing from the center of the bow to the tip. The first motion we learn is usually that one, from the middle to the tip, where only the elbow is at play. On the opposite, to go from the middle of the bow to the frog requires two gestures at the same time (elbow and shoulder) in order to get a straight bow. This is more difficult to perform; that is why it is usually after a while that this second part of the bow is used. ** In many alternative styles of music (Irish, Bluegrass, Jazz), players almost never use the bow till the frog, and that is why.** When you start and if you want a correct sound quickly, do as they do: play in the upper part of the bow. That way, mastering pressure and motion is easier. You will definitely limit your squeaking.
  3. Changing of bow directions. That is the last pitfall. Remember, the hair of the bow grips the string. If there is not a motion, that resistance creates scratchy sounds. And when bow direction is changed, there is a small moment of immobility. When the motion starts again, the bow grips the string with too much weight (pressure), and that creates a squeaking sound. That is why two things need to be acquired: a) you need to relieve pressure slightly when changing directions, b) the fingers of the right hand are flexible and act as springs, accompanying that motion (a bit like car suspensions that react to the car stopping or starting). I have made a gif to illustrate this small yet important gesture, as words can’t sometimes carry as much information as video.

For a good technique, the right arm has to be neither too flexible nor too stiff. But for a beginner, too flexible is preferable if avoiding squeaks is the objective. Eventually, the violinist will get a proper sound and then a great one.

4. Conclusion

To sum up, just trust your teacher. But if you want to avoid squeaking fast, clean your strings thoroughly, apply the right amount of rosin on your bow, use the upper part of the bow, try to use a bit more bow speed, play closer to the fingerboard, and keep flexible right-hand fingers. That can have a strong impact on improving bad violin sound. Now, if you want to sound great, there is a lot more to it, and I have written this long blog post on sound production.

Now, do not confuse a squeaking sound and a whistling string. I have covered in this lengthy article how to avoid our E string to whistle.

By FRANCOIS

I have been playing the violin since the age of 6. I have studied, like many, classical music at a conservatory. At the same time, I discovered
Miles and Coltrane, BB King and Clapton... So I decided to learn how to improvise, how to free my playing, and how to incorporate these new elements in my music. This new Violin Vibe, this is what I want to share with all of you!